Category Archives: Stave / Segment Series

6.5×14″ Bubinga Stave Snare

A 1/2″ thick solid bubinga Stave Series snare drum finished in our satin specialty lacquer. This drum has tons of warm low end and it’s shell thickness adds a better projection and high end pop; truly a great combo. This 6.5×14″ shell is finished in our satin specialty natural lacquer which is a high end paint featuring the same great properties as our high gloss, but with a 30% sheen level. This finish has excellent scratch resistance, is highly durable and creates a smooth topcoat. The black nickel hardware shows off this shell excellently. Full length tube lugs, 2.3mm triple flanged hoops and a Trick throwoff.


5×14″ Padauk & Maple Stave

The combination of 2 incredible woods for a drum. Padauk has a nice bite but naturally has a darker tone that is complimented with alternating staves of maple, a staple material choice for drums, which adds high end crack and warmth. The thin 3/8″ shell provides the most amount of low end body and resonance while retaining strength integrity. Stave drums have a bit more tone than a typical ply shell with a unique look. This 5×14″ snare features turret double ended lugs, 2.3mm triple flanged hoops, and a Trick multi step throwoff.

A 1″ Thick Maple Stave Snare



5×14″ Exotic Wood Padauk Stave Snare

A more exotic wood type used for this 5×14″ Stave Series snare. Padauk is a hard, dense wood with great acoustic properties. It has a touch darker sound than typical maple but extremely warm with a wider tuning range and a bit more clarity. The 1/2″ thickness adds volume and high end attack. The included chrome hardware features rounded double ended lugs for minimal mass and shell contact, 2.3mm triple flanged hoops, a Nickelworks clear and chrome throwoff, german brass snare wires and Remo drumheads.



7×14″ Purpleheart & Ash Stave 1.5″ Thick



7×13″ Bubinga & Maple Stave w/ Satin Chrome Hardware